Quick-Install Automatic Focus Motorised 22X Optical Zoom Colour Camera easy Menu driven Push-Button On-Screen-Setup Ľ" SONY Super-HAD CCD Image Sensor

Fully self contained Colour Security Camera Automatic-Focus Motorised 22X Optical Zoom, simply Plug-In & View.

Ideal for fixed applications or easily re-locate it using push-button Zoom Lens for desired shot, Automatic Electronic Shutter for exposure control. Easy push-button On-Screen Setup to tailor parameters and cope with problem situations.

OPTIONS

Microphones better than inbuilt microphones from $5

Versatile 3.9 ~ 85.8 mm Variable-Focal-Length Lens.

Full-Screen 0.6 m 'Head & Shoulders' or 'Cash Drawer' shots @ 15 m.

Full-Screen 'Entry' 2 m wide shots @ 40+ m.

Wide 13.8 m shots @ 15 m.

Compatible RS485 Devices:
2-Wire 128 Channel Joystick Controller
Test-CCTV28 PTZ Setup Monitor Analyser
IPwTX Wired / Wireless Network AV Server

goto 26X Optical 1/4" Sony CCD
goto 960H 18X Optical Effio 1/3" Sony CCD

Ľ" SONY Super-HAD CCD Image Sensor

22X Optical Zoom | Automatic Focus

~ 48 dB Signal:Noise Ratio | ~ 1 Lux | 500 + H-Pixels

**Versatile 3.9 ~ 85.8 mm Variable Focal-Length Zoom Lens**

Full-Screen 'Entry' 2 m wide shots @ 40+ metres

RS485 Pelco-D compatible or 'Wired' Remote Control

Automatic Focus 22 times 'Optical' Zoom Security Camera High Sensitivity High Signal to Noise ratio Ľ" Sony CCD Image Sensor - Wide Band DSP. This Security Camera is suitable for most common Surveillance applications, it can be 'named' (programmable Title) for easy identification in multi Camera installations.

Suitable for fixed applications but easily re-located just press-buttons to Zoom in/out for desired shot, focus and walk-away Automatic Electronic Shutter takes care of varying light levels. If required easy Menu driven On-Screen Setup can be used to tailor settings for difficult or unusual situations. Ideal for domestic and commercial Security and easily added to an existing Security Recording system simply connect Video Output from Camera to an unused Security DVR Video input.

Connect this Security Camera to the Composite Video Input (AV, Yellow RCA socket) on TVs and Domestic or commercial Recording Devices, if required a Microphone can be easily added and a single small diameter Cable used to carry Video, Audio & Power 20 or more metres.

297 984 Pixel CCD Image Sensor unlike similar cameras (CMOS sensor) this Security Camera has a Sony Charge Coupled Device (CCD) Image Sensor with significantly higher Sensitivity and higher Signal-to-Noise ratio than an a CMOS sensor.

All values are approximate.	@ 3 metres	@ 5 metres	@ 9 metres	@ 15 metres
Width of Vision @ 3.9 mm setting	2.7 metres	4.6 metres	8.3 metres	13.8 metres
Width of Vision @ 85.8 mm setting	0.13 metres	0.21 metres	0.38 metres	0.63 metres
Security Camera Lens information

to view 'User Manual'

Video System: PAL Colour fully compatible with Australian TV System.

Image Device: 512 (H) x 582 (V) 297 984 Pixel Ľ" Sony Super HAD CCD Image Sensor.

Super HAD Security Camera CCD Sensor

Lens: Motorised Focus/Zoom, 22X Optical ZOOM, focal length 3.9 mm ~ 85.8 mm, Automatic Focus.

Scanning System: 2 : 1 Interlace, PAL 50 Hz vertical, 15 625 Hz horizontal.

Synchronisation: Internal.

Video Output: 1.14 V p-p Composite Video 75 ohms, suit Australian TV, VCR, AV & Video inputs, BNC socket.

Horizontal Pixels: 500 +, this value is provided for comparative purposes only, Better than VHS resolution.

Sensitivity: ~ 1 lux @ F1.2 50 IRE, this value is provided for comparative purposes only.

Automatic Electronic Shutter (AES): 1/50 to 1/100 000 second.

Automatic Gain Control (AGC): Max 18 dB.

Signal to Noise ratio: ~ 48 dB, measured with AGC off.

White Balance: ATW / AWB / FIXED, 3 200 ~ 9 600şK.

OSD Control: Five push-Buttons on Back of Camera - Menu (Return), Zoom+ (Up), Zoom- (Down), Focus+ (Right), Focus- (Left).

Input/Output: DB9 socket, Pin 1 Gnd (-), Pin 2 TXD, Pin 3 RXD, 4 Gnd (-), Pin 5 Menu, Pin 6 12 V +, Pin 7 Lens Com, Pin 8 Zoom, Pin 9 Focus.

RS485: PELCO™-D Protocol 2400 bps for control of Zoom, Focus & On-Screen setup.

Power Requirements: 12 Volts DC Regulated, ~ 250 milliamps, via press-to-release Terminals.

Dimensions (mm): ~ 61 x 71 x 114, includes 1/4" UNC Tapped Mounting Block on Base (Camera Mounting Brackets), excludes I/O sockets.

Suggested Settings:

(1) First: Reset Camera to Default.
(2) Focus: 'Kctl' or 'Manual' for most static applications - 'Auto' for dynamic & PTZ applications. May require some trial & error to determine best setting in some situations.
(3) AES: 'Auto' for most situations - 'Fixed' for fast motion.
(4) Day Night: 'Auto' to eliminate Colour-noise in low light - 'Colour' to identify coloured indicators, Traffic Lights, etc.
(5) BLC: 'Off' except in Back-Lit situations such as Entrances, Windows, etc where Daylight or other Strong Lighting is behind subject.

To clear WAIT message Power Camera Off for 10 seconds then On again to re-boot.

Mass: ~ 350 grams.

Manufacturer: Over 18 years experience. ISO 9001, CE, FCC, RoHS certification. OEM & ODM supplier.

Made in China.