Li-Polymer rechargeable Battery Pack

Back-Up power Cameras for up to 20 hours

[A2155f-1338m] $10 Converter 2.1 x 5.5 mm Socket to 1.3 x 3.8 mm Plug for use with TX-Mini & RX-Mini.
 
Camera Back-Up power Cameras for up to 20 hours (depends on current) use with Cable-2f1m for a quick plug-in solution.

Regulated DC Power Supplies Mains Adaptor
Output voltage is constant regardless of input voltage or load

Regulated DC Power Supply Mains Plug Pack
Output voltage is constant regardless of input voltage or load

Output: 12 Volts DC Regulated 0.3 Amp (300 mA maximum) 2.1 x 5.5 mm Plug Center (+) ~ 1500 mm Cable.

Input: 240 volts ac, 50 Hertz, Australian/NZ Pin pattern.
Dimensions: ~ 48x68x50 mm excluding pins. Weight:  ~ 260 grams.

Narrow-Width Regulated Switch Mode Mains Adaptor / Plug Pack

Output: 12 Volts DC Regulated 1 Amp (1 000 mA maximum) 2.1 x 5.5 mm Plug Center (+) ~ 1500 mm Cable.

Input: 100 ~ 240 volts ac, 47 ~ 63 Hertz, Australian/NZ Pin pattern.
Dimensions: 39/40 (W), 74/75 (H), 35/50 (D) mm excluding pins. Weight: 128/160 grams. Size/Weight depends on version in stock at time of supply.

Adaptors fit next to each other in most General Purpose Outlets & Power Boards

Output: 12 Volts DC Regulated 1.5 Amp (1500 mA maximum) 2.1 x 5.5 mm Plug Center (+) ~ 1500 mm Cable.

Input: 96 ~ 264 volts ac, 50 ~ 60 Hertz, Australian/NZ Pin pattern. Suitable for use in USA when used with ADAP-USA.

Dimensions: 81 x 55 x 50 mm excluding pins. Weight: ~ 180 grams.

Output: 12 Volts DC Regulated 0.5 Amp (500 mA maximum) 2.5 x 5.5 mm Plug Center (+) ~ 1100 mm Cable

Input: UNIVERSAL 100 ~ 240 volts ac, 50 ~ 60 Hertz, IEC-C14 socket. Suitable for most countries using appropriate IEC Power Cord (details here).

Dimensions: ~ 120 x ~ 36 x ~ 58 mm. Weight: ~ 310 grams.

Cat Code: AUm-C13 Power Cable $5.

Output: 12 Volts DC Regulated 6.7 Amps (6700 mA maximum) ~ 1500 mm Cable
 
1p 2.5 x 5.5 mm DC Plug Center (+) pictured
 
4p 4 pin DC Plug (suits most of our JPEG 2000 DVMRs)
 
Input: UNIVERSAL 100 ~ 240 volts ac, 50 ~ 60 Hertz, IEC-C14 socket. Suitable for most countries using appropriate IEC Power Cord (details here).
 
Dimensions: ~ 150 x ~ 36 x ~ 60 mm. Weight: ~ 450 grams.
Cat Code: AUm-C13R Power Cable $4.

suitable for TX-Mini & RX-Mini DC Plug not suitable for Cameras

Output: 12 Volts DC, Regulated 0.3 Amp (300 mA maximum) 1.3 x 3.8 mm Right-Angle Plug Center = (+) ~ 1500 mm Cable.

Input: 240 volts ac, 50 Hertz, Australian/NZ Pin pattern. Weight  ~ 500 grams.

Output: 15 Volts DC Regulated 1.2 Amps (1200 mA maximum) 2.1 x 5.5 mm Plug Center (+) ~ 1500 mm Cable.

Ideal for maximum output from  IR-ILLUM Infrared Illuminator

Input: 96 ~ 264 volts ac, 50 ~ 60 Hertz, Australian/NZ Pin pattern.

Dimensions: ~ 81 x 55 x 50 mm excluding pins. Weight: ~ 180 grams.

Unregulated DC Power Supplies Mains Plug Packs
Output voltage varies with input voltage & load.

Unregulated DC Power Supplies Mains Adaptors
Output voltage varies with input voltage & load.

Output: 12 ~ 17 Volts DC 0.5 Amp (500 mA) 2.1 x 5.5 mm Plug Center = (+).

Input: 240 volts ac, 50 Hertz, Australian/NZ Pin pattern

Dimensions: ~ 50 x 60 x 55 mm, ~ 290 grams, ~ 1800 mm DC Cable.

Output: 12 ~ 17 Volts DC 1 Amp (1000 mA) 2.1 x 5.5 mm Plug Center = (+).

Input: 240 volts ac, 50 Hertz, Australian/NZ Pin pattern

Dimensions: ~ 50 x 80 x 55 mm, ~ 540 grams, ~ 1800 mm DC Cable.

AC Power Supplies Mains Adaptor
Output voltage varies with input voltage & load.

AC Power Supply Mains Plug Pack
Output voltage varies with input voltage & load.

Output: 24 ~ 28 volts ac, 1 000 milliamps, 2.1 x 5.5 mm Plug.

Input: 240 volts ac, 50 Hertz, Australian/NZ Pin pattern.

Dimensions: 57 x 80 x 55 mm, ~ 550 grams, ~ 1800 mm cable.

Suitable for Dome2-P/T, Pan-Tilt 302, Dome2HR-P/T, Pan-Tilt 301, CTL-PTZF, REG-12VDC, etc.

Output: 24 ~ 28 volts ac 2 Amps (2000 mA) ~ 1500 mm Fig 8 cable with screw terminal block.

Input: 220 volts ac, 50 Hertz via ~ 1500 mm Fig 8 Cable without plug (Clipsal *439SY or similar AU/NZ Mains Plug included loose).

Dimensions: ~ 70 x ~ 70 x 65 mm, ~ 1 kg.

Also available on request fitted with 2 round-pin Euro Plug.

Power over Ethernet

PoE for Network & Security Cameras via UTP & BalUns

for Network devices, Power over Ethernet Adapter, deliver data & electrical power to Ethernet devices using a single Ethernet cable. Eliminates the need to position LAN devices such as a Network IP Camera, Network Video Server, Wireless Access Point, etc., near a power outlet, providing freedom of placement.

for Baluns & unshielded twisted pair cable for transmission of Composite Video, S-Video &/or Audio signals together with Power over single 4 pair Cat-5 Cat-6 Cable. Eliminates the need to position CCTV Cameras near a power outlet, providing freedom of placement.

Power over Ethernet (PoE) Adapter is simple to install, requiring no tools or software. Its compact size makes installation easy. Connect the base unit (PoE Injector) to a power outlet & connect the terminal unit (PoE Splitter) to your network device using any standard Ethernet cable. Once set up, the PoE Splitter can power any 5V or 9V or 12V Ethernet device.

Simplifies installation of Network devices & CCTV Cameras allowing you to place them beyond the range of standard power outlets and mount them in a ceiling or outside without needing mains power nearby.

Power over Ethernet (PoE) Adapter, allows power & data to be transmitted up to ~ 100 metres & power for CCTV Cameras up to ~ 2 400 metres (depending on load current) using standard Twisted Pair cabling . More...

Injector Input: UNIVERSAL 100 ~ 240 volts ac, 50 ~ 60 Hertz via IEC-C14 socket More... Injector Output: 48 VDC via TP Cable. Splitter Output: DC 5 V @ 1.5A or 9 V @ 1.2A or 12 V @ 1A.

Transmit power 600 + metres via one pair using 24 vac Power & Rectifier-Regulator. Cable resistance, length & Load Current affect cable voltage drop which can be reduced by using thicker wire &/or paralleling pairs. A test using a 24 AWG Cat-5 pair, 24 vac Power Supply, REG-12VDC and a device that draws 100 milliamps demonstrated that lengths of 600 + metres is practical, 2 pairs in parallel would increase this to 1 200 + metres. A single 24 AWG (0.5 mm diameter) conductor has a resistance of ~ 9.4 ohms per 100 metres, voltage drop will be ~ 1 volt per 50 metres of Cat-5 Twisted Pair when powering a device that draws 100 milliamps. (9.4 ohms x 0.1 amps = 0.94 Volts)

This easy Passive PoE (Power over Ethernet) Power Inserter/Extractor utilises unused pairs (pins 4, 5, 7, 8) in a 100 baseT network cable to transmit power to remote network devices. It is a low cost, easy solution to provide power for network products that do not support Power Over Ethernet or Security Cameras.

for Network devices deliver data & electrical power to Ethernet devices using a single Ethernet cable, eliminates the need to position LAN devices such as Network IP Cameras, Network Video Servers, Wireless Access Points, etc., near a power outlet, providing freedom of placement.

for Baluns & unshielded twisted pair cable for transmission of Composite Video, S-Video &/or Audio signals together with Power over a single 4 pair Cat-5 Cat-6 Cable, eliminates the need to position Security Cameras near a power outlet, providing freedom of placement.

Power over Ethernet (PoE) Adaptor is compact & simple to install. Connect one Adaptor to 5/12/24/48 volt power supply & another to the device to be powered via a standard Ethernet cable, power is transmitted via pins 4&5 (Black with White trace) and pins 7&8 (Black wire). Simplifies installation of Network devices & Security Cameras allowing them to be placed beyond the range of existing power outlets, mount devices in a ceiling or outside.

Connectors Plugs Sockets

Power Splitter Distributor Automatic Resettable Fuses

$16 Bulk-Buy 40 +

Power-Present Indicators, Surge protection & Auto-Reset Fuses.
NINE Auto-Reset polymer-based Positive Temperature Coefficient Fused outputs * Surge protected input * NINE LED Output Status Indicators.

Power Cameras / Microphones or other devices from a single Power Supply. Input up to 30 volts AC or DC via Screw Terminals, input Terminal labelled (+) connects to output terminals labelled (+) via PTC Fuses, Outputs are via 9 pairs of screw terminals, ~138 x 65 x 40 mm.

PTC Characteristics @ 20ºC: Initial Resistance: 0.15 ~ 0.38 ohms. Holding-Current: ~ 1.1 Amps. Trip-Time: ~ 8 Seconds @ 5.5 Amps.

IDEAL FOR TWISTED PAIR CABLING SYSTEM Companion products: REG-12VDC, REG-12VDC+, Rect-Reg & Rect-Reg+ Rectifier-Regulator here 

6 Outlets, Neon Power Present indicator, ON/OFF switch, Circuit breaker with Reset Button shuts off power in the event of overloading.

Cat Code: Cable-2155L $2 2.1 x 5.5 mm male Plug ~ 500 mm Cable (not stripped & tinned).

2.1 x 5.5 mm male Plug with Plug-In Screw Terminal Block for wires.

2.1 x 5.5 mm Right Angle male Plug ~ 150 mm Cable with stripped & tinned wires.

2.1 x 5.5 mm female Socket ~ 75 mm Cable (not stripped & tinned).

Ideal for use with Cameras that have 'Screw Terminals' and Power Supply or Cable with 2.1 x 5.5 mm Plug.

Cat Code: Cable-3813/L $3 1.3 x 3.8 mm male Plug ~ 1500 mm Cable (not stripped & tinned).

Adaptor 5.5 mm x 2.1 mm Male to 5.5 mm x 2.1 mm Male.

Automotive Car Cigarette Lighter Regulator

AC DC Rectifiers Regulators

Output: 12 Volts DC Regulated 1 Amp (1 000 mA maximum) 2.1 x 5.5 mm Plug Center (+).

Input Volts DC: 13.5 (nominal), 12.5 (min), 15 (peak) via 'Cigarette Lighter Plug' Center (+), LED Power-Present indicator. Filters common Automobile Voltage Spikes / Sags / Surges. Taiwan Quality.

Output: 12 Volts DC Regulated 250 milliamps when input is less than 20 volts 150 milliamps when greater 2.1 x 5.5 mm Plug Center (+).

Ideal for long power cable runs where voltage drop due to cable resistance is a problem.

Input: 16 ~ 24 vac or 20 ~ 30 VDC via 'Screw Terminal Block'.

Use with PP24/1A, PS24/2A

Output: 12 Volts DC Regulated. Maximum 500 milliamps when input is less than 20 volts 450 milliamps when greater 2.1 x 5.5 mm Plug Center (+).

Ideal for long power cable runs where voltage drop due to cable resistance is a problem.

Input: 18 ~ 24 vac or 22 ~ 30 VDC via 'Screw Terminal Block'.

Dimensions: ~ 28 x ~ 25 x ~ 45 mm, ~ 35 grams, ~ 150 mm Wires.

Use with PP24/1A, PS24/2A.

Output: 12 Volts DC Regulated. Maximum 1000 milliamps when input is less than 20 volts 750 milliamps when greater 'Screw Terminals'.

Ideal for long power cable runs where voltage drop due to cable resistance is a problem.

Input: 18 ~ 24 vac or 22 ~ 30 VDC via 'Screw Terminals'.

Dimensions: ~ 87 x ~ 25 x ~ 25 mm, ~ 80 grams.

Use with PP24/1A, PS24/2A.

European Regulated Mains Adaptors Power Supplies

European Regulated Mains Plug Pack Power Supply

Cat Code: EU12/1A $10 - 1 Amp (1000 mA) output

Cat Code: EU12/1.5A $12 - 1.5 (1500 mA) output

Output: 12 Volts DC Regulated, 2.1 x 5.5 mm Plug Center (+) ~ 1200 mm Cable. Input: 100 ~ 240 volts ac, 50 / 60 Hertz European Pin pattern (2 round pins)

Cat Code: EU12/0.3A $15 - 0.3 Amp (300 mA) 1.3 x 3.8 mm Plug

Output: 12 Volts DC Regulated 2.1 x 5.5 mm Plug Center (+) ~ 1200 mm Cable. Input: 230 volts ac, 50 Hertz European Pin pattern (2 round pins)

Output: 12 Volts DC Regulated 0.5 Amp (500 mA), 2.1 x 5.5 mm Plug with Center = (+) on ~ 1400 mm Cable

Input: 220 volts ac, 50 Hertz, ~ 200 mm Cable European Pin pattern (2 round pins). Dimensions: ~ 54 x 73 x 45 mm, ~ 532 grams.

Line-Interactive Back-Up Uninterruptible Power Supplies
AC Output voltage is constant regardless of input voltage or load.

Back-Up Uninterruptible Power Supply
AC Output voltage is constant regardless of input voltage or load.

Line-Interactive Back-Up Uninterruptible Power Supply.

Cat Code: UPS-DVR from $0 Detailed info here

• Surge Protection

• Modified Sine Wave

• Overload Protection

• LED Status Indicator

• DC Power On function

• Short-Circuit Protection

• Automatic Voltage Regulation

• CCCV Battery Charger with excess Discharge Protection

• Auto Restart when Mains recovers ESSENTIAL for CCTV Surveillance

IEC Power Cords Australian New Zealand European United States of America United Kingdom Hong Kong Singapore USA Adaptor

IEC Power Cable Australia NZ Europe USA UK HK Singapore

7.5 Amp (0.75 mm²) Power Cord 1800 mm Straight Plug pictured as used on Personal Computers & other equipment in Australia & New Zealand, suitable for use with REG12/5A, DVMR, UPS-DVR, etc.

Cat Code: AUm-C13S $5

7.5 Amp (0.75 mm²) Power Cord 1000 mm Straight Plug pictured as used on Personal Computers & other equipment in Australia & New Zealand, suitable for use with REG12/5A, DVMR, UPS-DVR, etc.

7.5 Amp (0.75 mm²) Power Cord C-14 Plug to Australian/New Zealand 3 Pin Socket, ~ 150 mm used to convert C-13 UPS-DVR Output to common 3 Pin Mains Socket.

Use this item & Cat Code: AU/m-C13 with: DVMR-AVN8e DVMR-8+ DVMR-AVN16e DVMR-16+

7.5 Amp (0.75 mm²) Power Cord ~ 1500 mm suitable for connecting UPS-DVR output to REG12/5A, DVMR, PC, etc.

7.5 Ampere Power Cord ~ 1800 mm as used on Personal Computers & other equipment in Europe suitable for use with DVMR, etc.

7.5 Ampere Power Cord ~ 1800 mm as used on Personal Computers & other equipment in Europe suitable for use with REG12/5A, DVMR, etc.

7.5 Ampere Power Cord ~ 1800 mm as used on Personal Computers & other equipment in United Kingdom, Hong Kong, Singapore, suitable for use with REG12/5A, DVMR, etc.

7.5 Ampere Power Cord ~ 1800 mm as used on Personal Computers & other equipment in United States of America, suitable for use with REG12/5A, DVMR, etc.

USA Adaptor: converts Australian pin pattern to United States of America pin pattern (2 parallel Rectangular & 1 Round pin) suitable for use with REG12/1.5A & REG12/1A .

 
All dimensions & weights are approximate !