Board Lenses
Pinhole Lenses
MegaPixel Lenses
CS Mount Manual Iris Lenses
CS Mount Automatic Iris Lenses
Book of 100 assorted clear film Filters

 
Video to DC Drive AI Lens Amplifier Box
Board Lens to CS Mount Adaptor
C Mount Lens Spacer Ring
PCB Lens Holders
Plug-AI
Filters

BOARD Fixed Iris Japanese Glass CCTV Lenses

Cat Code:

High Quality Fixed Iris lenses made in Korea using Japanese Optical Glass. Lens Mount 12 mm diameter x 0.5 mm pitch.

Cat Code:

High Quality Fixed Iris lenses made in Korea using Optical Glass from Japan.

$10

 
Fixed Iris Japanese Glass CCTV Lenses

Cat Code:

High Quality Fixed Iris lenses made in Korea using Japanese Optical Glass 1" diameter x  32 threads-per-inch C/CS Mount.

Cat Code:

JAPANESE Manual Iris 1" diameter x  32 threads-per-inch CS Mount.

Cat Code:

1" x 32 tpi CS Mount Mega Pixel Network Camera Lenses can be used with 437 000 + pixel ¼" Sensors for improved image quality

Automatic Iris CS Mount CCTV Lenses

Cat Code:

1" x 32 tpi CS Mount Direct Drive Automatic Iris (DD, DC) fitted with Plug-AI.

Wireless Remote Pan / Tilt / Zoom / Focus Controller

Cat Code: Plug-AI $1 * Cat Code: Plug-AI//BP Bulk Pak 50 pieces $25
to suit all C and CS Mount Cameras with an Auto Iris Lens Output in this Catalogue.

FILTERS for: experimental purposes.

Infra-Red PASS for: experimental purposes.

Cat Code: FIL-IR670 $49
Sheet of Optical Quality Long Pass Material, passes light greater than ~ 670 nanometres wavelength. Suitable for concealing Camera Lens or the LEDs in an IR Illuminator (ILLUM-KIT) or for construction of an Infra-Red Illuminator using an incandescent lamp. Lightweight plastic, Thermoset ADC (CR-39), transmission > 90%, 1-2% peak at 500 nanometres green colour. Maximum operating temperature 100 degrees centigrade continuous (130 degrees one-hour). Thickness ~ 1.5 millimetres ~ 100 mm x ~ 125 mm.

Cat Code: FIL-IR730/10 $10
Infra-Red Pass Film 0.1 mm flexible, passes light greater than ~ 730 nanometres wavelength. Covers the rear element of most Board or Pinhole lenses or image area of a 1/3 inch sensor ~ 10 mm disc.

Cold-Mirror25 $40
Glass ~ 25 mm Square, ~ 3 mm Thick. Reflects Visible Spectrum (less than ~ 700 nm), Transmits/Passes Near Infrared Spectrum (greater than ~ 700 nm), to reduce heat in projection systems, etc etc.

Cold-Mirror $50
Glass ~ 65 mm x 60 mm, ~ 2 mm Thick. Reflects Visible Spectrum (less than ~ 700 nm), Transmits/Passes Near Infrared Spectrum (greater than ~ 700 nm), to reduce heat in projection systems, for Incandescent Infrared Illuminators, etc etc.

Infra-Red CUT for: experimental purposes.

Cat Code: FIL-IRCUT/6.8mm  $10
Infra-Red CUT Filter passes light less than ~ 730 nanometres wavelength, Glass ~ 6.8 mm Diameter, ~ 0.1 mm Thick.

IR/BP310-700 $10 used has surface marks
Band-Pass Filter passes between ~ 320 ~ 620 nanometres, can also be used as a Short Pass filter with Cut-Off @ ~ 645 nm. Glass ~ 25 mm Diameter, ~ 3 mm Thick, Blue-Green Colour, Center Wavelength ~ 470 nm.

IR-CUT25/17 $50 used virtually unmarked
Infra-Red CUT Filter passes light less than ~ 700 nanometres wavelength, Glass multi-layer ~ 25 mm Diameter on one side and ~ 17 mm Square on other, ~ 10 mm Thick, fitted in ~ 35 mm Diameter Rubber Mount.

Cold-Mirror25 $40
Glass ~ 25 mm Square, ~ 3 mm Thick. Reflects Visible Spectrum (less than ~ 700 nm), Transmits/Passes Near Infrared Spectrum (greater than ~ 700 nm), to reduce heat in projection systems, etc etc.

Cold-Mirror $50
Glass ~ 65 mm x 60 mm, ~ 2 mm Thick. Reflects Visible Spectrum (less than ~ 700 nm), Transmits/Passes Near Infrared Spectrum (greater than ~ 700 nm), to reduce heat in projection systems, for Incandescent Infrared Illuminators, etc etc.

Gold-Mirror $40
Concave, First Surface, Gold Coated, Glass ~ 32 mm Diameter, ~ 5 mm Thick, ~ 25 mm Focal Length.

Colour Temperature Correction for: experimental purposes.

Polarised for: experimental purposes. Extinction (crossed) ~ 0.4% - 0.5%.

Cat Code: FIL-POL/10 $10
Covers the rear element of most Board or Pinhole lenses or image area of a 1/3 inch sensor ~ 10 mm flexible disc, ~ 0.25 mm thick, Grey tint, Transmission ~ 25%.

Cat Code: FIL-POL/063 $30
63 mm diameter, flexible disc, ~ 0.65 mm thick, Grey or Brown tint depending on stocks, Transmission: ~ 22% Brown, ~ 25% Grey.

Cat Code: FIL-POL/? x ? cm '$5.00 Cutting Charge' plus $0.20 per cm² , minimum buy 25 cm² ($10) Specify dimensions when ordering
Flexible Polarising Material Cut-to-Size (rough cut) to cover the front element of a lens, for window of an outdoor housing, etc., ~ 0.74 mm thick, Brown tint, Transmission ~ 22%, Polarising Efficiency 99+%, UV Absorption 99+%

Cat Code: FIL-BK $35
BOOK of 100, 82 mm x 38 mm sheets most with a Spectral Transmission Graph. Coloured layer is sealed between two microscopically thin layers of clear film using tri-extrusion technology. Ideal for inspection and other applications, often unseen details will be revealed depending on light source, filter colour, etc.

PCB Lens Holders Surplus clearance items for experimental purposes
NO DIMENSIONAL OR OTHER INFORMATION AVAILABLE
It may or may not be possible to adapt these to suit products in this catalogue. Holders may sometimes be attached directly to the IMAGE SENSOR IC with neutral cure silicone or other adhesive.

Cat Code: PIN-12DPL $6 each (10 for $50)
Plastic PCB Lens Holder 12 mm x 0.5 mm thread for Pinhole Lens.

Cat Code: PIN-10HPL $8
Plastic PCB Lens Holder 10 mm x 0.5 mm thread for Pinhole Lens.

Cat Code: PIN-13HPL $6
Plastic PCB Lens Holder 13 mm x 1 mm thread for Pinhole Lens.

Cat Code: PIN-10DAL $6
Aluminium PCB Lens Holder 10 mm x 0.5 mm thread for Pinhole Lens.

Cat Code: PIN-13DAL $6
Aluminium PCB Lens Holder 13 mm x 1 mm thread for Pinhole Lens.